When installing the driver of the HD high-definition sound card, another problem also brought about. The system could not load, which prompted that the C_936.nls file was lost or damaged. Ai, it was raining all night, so he had to enter the system to repair it and perform fault repair. This C_936.nls file is actually a file supported by Windows for multilingual programs. C_936 is an internationally defined Chinese code. How can you enter the Chinese operating system without it!
Solution (I):
1. Find a system CD of XP, set the optical drive to start the machine, press the "R" key after starting it and enter the Windows fault console;
2. Run (G is an optical drive disk)
expand G:\i386\C_936.NL_ C:\windows\system32\C_936.NLS
3. Then run Exit to close the recovery console and restart the computer.
Solution (2):
1. Use the XP installation disk to boot the computer and enter the Windows fault console.
2. Run the following command under the fault console (X is the optical drive letter):
copy X:\i386\C_936.NL_ C:\windows\system32
Enter the C:\windows\system32 directory to run the command:
rename C_936.NL_ c_936.nls
3. Restart the computer and solve the problem
You can also refer to the article "Solutions for the Loss of C_936.nls Files"
Last week, the computer in the school accounting room was too poisoned, and the desktop was not displayed at all. After solving this problem, I felt that the machine was too slow, so I sorted out the computer for this computer and deleted some junk files under the C drive. The space of the C drive suddenly increased by hundreds of megabytes, and I couldn't help but feel secretly happy! Restart the computer, and the system prompts "Windows detected C - lost, the system cannot start!" as soon as the system passes the self-test. It's over! It is not scary to spend 2 hours working on the system. It is scary because this is a machine specially used for financial statistics in the accounting room. If there are too many information on it, there are many financial software. It is really scary! After some effort, I used the Windows fault console to solve the problem. The steps are as follows:
1. Use the XP installation disk to boot the computer and enter the Windows fault console.
2. Run the following command under the fault console:
copy X:\i386\C_936.NL_ C:\windows\system32
Enter the C:\windows\system32 directory to run the command:
rename C_936.NL_ c_936.nls
3. Restart the computer, the problem is solved, and everything is normal! !
Relieve, the problem has finally been solved! Haha, if you also encounter this problem and you successfully solved the problem with this method, then you are welcome to leave a comment to let us know that this method works so that more people who are worried about it will no longer be bothered.
Solution (I):
1. Find a system CD of XP, set the optical drive to start the machine, press the "R" key after starting it and enter the Windows fault console;
2. Run (G is an optical drive disk)
expand G:\i386\C_936.NL_ C:\windows\system32\C_936.NLS
3. Then run Exit to close the recovery console and restart the computer.
Solution (2):
1. Use the XP installation disk to boot the computer and enter the Windows fault console.
2. Run the following command under the fault console (X is the optical drive letter):
copy X:\i386\C_936.NL_ C:\windows\system32
Enter the C:\windows\system32 directory to run the command:
rename C_936.NL_ c_936.nls
3. Restart the computer and solve the problem
You can also refer to the article "Solutions for the Loss of C_936.nls Files"
Last week, the computer in the school accounting room was too poisoned, and the desktop was not displayed at all. After solving this problem, I felt that the machine was too slow, so I sorted out the computer for this computer and deleted some junk files under the C drive. The space of the C drive suddenly increased by hundreds of megabytes, and I couldn't help but feel secretly happy! Restart the computer, and the system prompts "Windows detected C - lost, the system cannot start!" as soon as the system passes the self-test. It's over! It is not scary to spend 2 hours working on the system. It is scary because this is a machine specially used for financial statistics in the accounting room. If there are too many information on it, there are many financial software. It is really scary! After some effort, I used the Windows fault console to solve the problem. The steps are as follows:
1. Use the XP installation disk to boot the computer and enter the Windows fault console.
2. Run the following command under the fault console:
copy X:\i386\C_936.NL_ C:\windows\system32
Enter the C:\windows\system32 directory to run the command:
rename C_936.NL_ c_936.nls
3. Restart the computer, the problem is solved, and everything is normal! !
Relieve, the problem has finally been solved! Haha, if you also encounter this problem and you successfully solved the problem with this method, then you are welcome to leave a comment to let us know that this method works so that more people who are worried about it will no longer be bothered.