Escape IE7 verification easily
When installing IE7, please do not click Verify when you reach the verification step. Enter the system disk:\Documents and Settings\All Users\Application Data\Windows Genuine Advantage\data to move the file to the desktop, and click Verify to escape easily.
Teach you how to DIY the time in the lower right corner of your computer
Click Start---Settings---Control Panel---Region and Language (98 is the Regional Settings) Options----Custom---Time-----In the H:mm:ss in the time format (T), add two tts before the H:mm:ss. If you want your lover's name to be displayed at the back of time, you can type tt behind H:mm:sstt. Then type your lover's name in the AM symbol (M): and type your lover's name in the PM symbol (P): and click the application/Confirm OK. Complete. Refresh on the screen and see if your lover's name is in front of the time in the lower right corner.
In the LAN, add locks to the IP address
Now many units have configured LANs. In order to facilitate network management, and to improve the speed of logging into the network, network management personnel generally specify IP addresses for each computer in the LAN. However, in the Windows environment, other users can easily modify the IP address configuration, which can easily cause IP address conflicts and other failures, which is not conducive to the normal management of the network. Therefore, it is best to add a "lock" to the IP address, so that others cannot easily change the IP address. There are three dynamic library files in Windows 2000/XP, and they are actually system controls that are automatically registered during the installation of Windows 2000/XP. These three controls are closely related to the network functions of Windows 2000/XP. When modifying the IP address, these three controls are required. Therefore, as long as the above three controls are uninstalled, the network connection window can be blocked. This way, no matter whether you double-click the online neighbor icon on the desktop or double-click the "Network Connection" item in the control panel, you cannot enter the network connection window normally, and you cannot modify the IP address in the local connection attribute window. Enter "" in "Start/Run", and after confirmation, open the CMD window, and execute the "Regsvr32 /u", "Regsvr32 /u" and "Regsvr32 /u" commands respectively to uninstall the above controls from the system. Of course, if you need to modify the IP address in the future, you can register the above controls one by one. The registration method is very simple. Just remove the "/u" parameter in the above command and you can perform the registration operation. For example, executing the command "Regsvr32" completes the control registration.
Delete the MSN shared folder in "My Computer"
Click "Start---Run", enter regsvr32 -U "C:\Program Files\MSN Messenger\" in the open "Run" dialog box. After clicking "OK", a successful prompt will pop up. It may be different depending on the version. For example, mine is regsvr32 -u "C:\Program Files\MSN Messenger\fsshext.8.1.0178."
Resolve the process
Full name: windows ink services platform tablet input subsystem. Windows Ink Service WordPad Platform Input Subsystem, Tablet PC
Create the following file: Run it in BAT instead
rem -- UnRegister MS XP Tablet PC Ink Pen components
@echo off
set sys32=%SystemRoot%\System32
set pfcfink=%CommonProgramFiles%\Microsoft Shared\INK
"%sys32%\" /unregserver
"%sys32%\" /u /s "%sys32%\"
"%sys32%\" /u /s "%pfcfink%/"
"%sys32%\" /u /s "%pfcfink%/"
"%sys32%\" /u /s "%pfcfink%/"
set pfcfink=
set sys32=
pause
You can enter the XP system without a password
Not long ago, a news appeared on the Internet saying that foreign Windows experts found that using the Win 2000 installation CD to boot the computer, you can use the Windows XP administrator password to enter the Windows XP recovery console mode.
Is this true? Let's do some testing.
The Wndows XP version used is Windows XP Proessional, and the Windows 2000 version used is the simplified Chinese version of Windows Proessional that integrates SP3. The author first installed Windows XP Professional on the C drive (FAT322 file system), and set the Administraor account password during installation. To confirm that the Administrator password has been set successfully, switch to the classic Windows login method, and then log in with the Adndnistrato account. You can see that you need a password when logging in, and there is no problem with setting the password of the Administrator account.
Reboot the computer, boot using the Windows 2000 Poessional installation CD, select Repair Windows 2000 (press R key); in the Wndos2000 installation selection interface, and then select Repair using the fault console (press C key). The system will scan the existing Window2000/XP version. Since the computer has only one operating system, only one login selection (l:C:\Windows) is listed. Press l from the keyboard and then enter. At this time, as it is said abroad, Window XP does not require the administrator password to be entered, but logs in directly into the recovery console mode (if you are using the Windows XP installation CD-ROM boot, you are required to enter the administrator password. The administrator referred to here refers to the Administraor account built-in system). Friends who are familiar with Windows know that any system-level operation can be performed in the recovery console, such as copying, moving, deleting files, starting, stopping services, and even formatting, repartitioning and other destructive operations.
Then, I installed the SPI patch for Windows XP, and used the WindowS 2000 installation CD to boot again. I repeated the above operation and found that the result was the same, but there was still no password input requirement, because I used the FAT32 file system before. The author guessed that this situation was caused by the FAT3Z file system. So I used the Convert command in Wndows XP to convert the FAT3Z file system into an NTFS file system, and then used the Windows 2000 installation CD to boot again. I repeated the above operation and found that the result was the same, but there was no password input requirement. It seems that this loophole really exists.
It should be noted that for various reasons, some Windows 2000 installation CDs on the market cannot display the failed console login option, so this vulnerability cannot be exploited. At the same time, due to the limitations of the faulty console mode itself, this vulnerability cannot be exploited from the network. In other words, this vulnerability is limited to a stand-alone machine, so the harm is not very high.
Later, I started using the official English version CD of Wndows 2000 Server integrated SP3. I found that the vulnerability still exists. It seems that not only the Chinese version has this problem, but also the English version has this problem.
Note: Since there is also a Windows 98, it is impossible to convert C drive to NTFS file system. Therefore, the test based on the NTFS file system is tested in the VMware virtual machine
Very funny pictures flying, enter the following code into the address in your IE browser:
javascript:R=0; x1=.1; y1=.05; x2=.25; y2=.24; x3=1.6; y3=.24; x4=300; y4=200; x5=300; y5=200; DI=; DIL=; function A(){for(i=0; i-DIL; i++){DIS=DI[ i ].style; ='absolute'; =(R*x1+i*x2+x3)*x4+x5; =(R*y1+i*y2+y3)*y4+y5}R++}setInterval('A()',5); void(0);
How to set up Yahoo Chinese email address using pop smtp
Method 1:
First log in to your email address, and then enter it in your browser address/config/set_popfwd?.src=ym&.done=/ym/Options?YY=22797
(Please pay attention to the accurate input, where "cnaxh" is my Yahoo email ID account, please enter your ID) At this time, a web page appears. After logging in directly with the Yahoo email account and password, you will find that the POP message receiving function is a service exclusive to Yahoo online direct investment members. Click the "Finish" button to proceed to the next step. The system automatically selects "Online Reading Email and POP Functions" for you in "Step 1". We just need to click the "Submit" button directly! Then you can set it up, of course, you can choose to send the server and accept the server.
pop3: smtp:
Method 2:
In just two easy steps, you can enjoy the high-quality value-added service of Yahoo Email
● 2G super large mailbox capacity Your mailbox capacity will be upgraded from 1G to 2G, easily storing more movies, pictures, and mp3s
● pop3/smtp enable pop3/smtp service, you can use Outlook, Foxmail and other clients to easily send and receive emails
● Email arrival reminder Whenever you receive a new email, Yahoo will notify you in time by text messages to avoid missing important emails
Step 1: Please enter your mobile phone number to bind to your email address so that you can receive email reminders correctly. Mobile phone binding is completely free
Please enter your mobile phone number here:
This service is not available to Yahoo Mail Alliance users and China Mobile users in Fujian.
Log in to your yahoo email. There is "2G capacity + POP + letter reminder" on the left
Click in and you will see the above content.
Modify the word "start" or "start" of the start button
Modify the start button, open "x:\windows\" with Resource Hacker, then find bitmap->176 and replace it with your favorite bmp file. It should be noted that the bmp file used here is the so-called 32-bit bmp, that is, the alpha transparent effect of 24bit bmp+8bit. I think everyone knows the specific production method.
As for the words "start" or "start" of the start button, its modification is also opened with Resource Hacker, and then find String Table->38->595 and change it to the words you want.
Cancel the default sharing
Cancel the default sharing
Method 1: Find key values:
Prohibit sharing of C$, D$, E$, ADMIN$
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\lanmanserver\parameters]
Modify key value: Set the value of "AutoShareServer" and "AutoShareWks" to: 0. If not, create a new DOWRD value.
Disable IPC$ sharing
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa]
Modify key value: Set the value of "restrictanonymous" to: 1, and if not, create a new DOWRD value.
Note: After canceling the automatic sharing on the power supply, the corresponding sharing must be removed. For example: Enter: net share c$ /del during operation, that is, delete the default C$ share.
Method 2: Use batch processing: Save the following two parts of the code as two files, place it in the same directory, and run it.
Save the following code as a .BAT file:
@ECHO OFF
TITLE is canceling the default partition sharing...
net share admin$ /del
net share c$ /del
net share d$ /del
net share e$ /del
net share f$ /del
regedit /s
exit
Method 3: Save the following code as a file:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\lanmanserver\parameters]
"AutoShareServer"=dword:00000000
"AutoShareWks"=dword:00000000
system32\Problems such as illegal file or the file is corrupted
In addition to most of the reason for the file setting error, there is another point here that the file has indeed been corrupted. For specific methods, please refer to the picture below.
When installing IE7, please do not click Verify when you reach the verification step. Enter the system disk:\Documents and Settings\All Users\Application Data\Windows Genuine Advantage\data to move the file to the desktop, and click Verify to escape easily.
Teach you how to DIY the time in the lower right corner of your computer
Click Start---Settings---Control Panel---Region and Language (98 is the Regional Settings) Options----Custom---Time-----In the H:mm:ss in the time format (T), add two tts before the H:mm:ss. If you want your lover's name to be displayed at the back of time, you can type tt behind H:mm:sstt. Then type your lover's name in the AM symbol (M): and type your lover's name in the PM symbol (P): and click the application/Confirm OK. Complete. Refresh on the screen and see if your lover's name is in front of the time in the lower right corner.
In the LAN, add locks to the IP address
Now many units have configured LANs. In order to facilitate network management, and to improve the speed of logging into the network, network management personnel generally specify IP addresses for each computer in the LAN. However, in the Windows environment, other users can easily modify the IP address configuration, which can easily cause IP address conflicts and other failures, which is not conducive to the normal management of the network. Therefore, it is best to add a "lock" to the IP address, so that others cannot easily change the IP address. There are three dynamic library files in Windows 2000/XP, and they are actually system controls that are automatically registered during the installation of Windows 2000/XP. These three controls are closely related to the network functions of Windows 2000/XP. When modifying the IP address, these three controls are required. Therefore, as long as the above three controls are uninstalled, the network connection window can be blocked. This way, no matter whether you double-click the online neighbor icon on the desktop or double-click the "Network Connection" item in the control panel, you cannot enter the network connection window normally, and you cannot modify the IP address in the local connection attribute window. Enter "" in "Start/Run", and after confirmation, open the CMD window, and execute the "Regsvr32 /u", "Regsvr32 /u" and "Regsvr32 /u" commands respectively to uninstall the above controls from the system. Of course, if you need to modify the IP address in the future, you can register the above controls one by one. The registration method is very simple. Just remove the "/u" parameter in the above command and you can perform the registration operation. For example, executing the command "Regsvr32" completes the control registration.
Delete the MSN shared folder in "My Computer"
Click "Start---Run", enter regsvr32 -U "C:\Program Files\MSN Messenger\" in the open "Run" dialog box. After clicking "OK", a successful prompt will pop up. It may be different depending on the version. For example, mine is regsvr32 -u "C:\Program Files\MSN Messenger\fsshext.8.1.0178."
Resolve the process
Full name: windows ink services platform tablet input subsystem. Windows Ink Service WordPad Platform Input Subsystem, Tablet PC
Create the following file: Run it in BAT instead
rem -- UnRegister MS XP Tablet PC Ink Pen components
@echo off
set sys32=%SystemRoot%\System32
set pfcfink=%CommonProgramFiles%\Microsoft Shared\INK
"%sys32%\" /unregserver
"%sys32%\" /u /s "%sys32%\"
"%sys32%\" /u /s "%pfcfink%/"
"%sys32%\" /u /s "%pfcfink%/"
"%sys32%\" /u /s "%pfcfink%/"
set pfcfink=
set sys32=
pause
You can enter the XP system without a password
Not long ago, a news appeared on the Internet saying that foreign Windows experts found that using the Win 2000 installation CD to boot the computer, you can use the Windows XP administrator password to enter the Windows XP recovery console mode.
Is this true? Let's do some testing.
The Wndows XP version used is Windows XP Proessional, and the Windows 2000 version used is the simplified Chinese version of Windows Proessional that integrates SP3. The author first installed Windows XP Professional on the C drive (FAT322 file system), and set the Administraor account password during installation. To confirm that the Administrator password has been set successfully, switch to the classic Windows login method, and then log in with the Adndnistrato account. You can see that you need a password when logging in, and there is no problem with setting the password of the Administrator account.
Reboot the computer, boot using the Windows 2000 Poessional installation CD, select Repair Windows 2000 (press R key); in the Wndos2000 installation selection interface, and then select Repair using the fault console (press C key). The system will scan the existing Window2000/XP version. Since the computer has only one operating system, only one login selection (l:C:\Windows) is listed. Press l from the keyboard and then enter. At this time, as it is said abroad, Window XP does not require the administrator password to be entered, but logs in directly into the recovery console mode (if you are using the Windows XP installation CD-ROM boot, you are required to enter the administrator password. The administrator referred to here refers to the Administraor account built-in system). Friends who are familiar with Windows know that any system-level operation can be performed in the recovery console, such as copying, moving, deleting files, starting, stopping services, and even formatting, repartitioning and other destructive operations.
Then, I installed the SPI patch for Windows XP, and used the WindowS 2000 installation CD to boot again. I repeated the above operation and found that the result was the same, but there was still no password input requirement, because I used the FAT32 file system before. The author guessed that this situation was caused by the FAT3Z file system. So I used the Convert command in Wndows XP to convert the FAT3Z file system into an NTFS file system, and then used the Windows 2000 installation CD to boot again. I repeated the above operation and found that the result was the same, but there was no password input requirement. It seems that this loophole really exists.
It should be noted that for various reasons, some Windows 2000 installation CDs on the market cannot display the failed console login option, so this vulnerability cannot be exploited. At the same time, due to the limitations of the faulty console mode itself, this vulnerability cannot be exploited from the network. In other words, this vulnerability is limited to a stand-alone machine, so the harm is not very high.
Later, I started using the official English version CD of Wndows 2000 Server integrated SP3. I found that the vulnerability still exists. It seems that not only the Chinese version has this problem, but also the English version has this problem.
Note: Since there is also a Windows 98, it is impossible to convert C drive to NTFS file system. Therefore, the test based on the NTFS file system is tested in the VMware virtual machine
Very funny pictures flying, enter the following code into the address in your IE browser:
javascript:R=0; x1=.1; y1=.05; x2=.25; y2=.24; x3=1.6; y3=.24; x4=300; y4=200; x5=300; y5=200; DI=; DIL=; function A(){for(i=0; i-DIL; i++){DIS=DI[ i ].style; ='absolute'; =(R*x1+i*x2+x3)*x4+x5; =(R*y1+i*y2+y3)*y4+y5}R++}setInterval('A()',5); void(0);
How to set up Yahoo Chinese email address using pop smtp
Method 1:
First log in to your email address, and then enter it in your browser address/config/set_popfwd?.src=ym&.done=/ym/Options?YY=22797
(Please pay attention to the accurate input, where "cnaxh" is my Yahoo email ID account, please enter your ID) At this time, a web page appears. After logging in directly with the Yahoo email account and password, you will find that the POP message receiving function is a service exclusive to Yahoo online direct investment members. Click the "Finish" button to proceed to the next step. The system automatically selects "Online Reading Email and POP Functions" for you in "Step 1". We just need to click the "Submit" button directly! Then you can set it up, of course, you can choose to send the server and accept the server.
pop3: smtp:
Method 2:
In just two easy steps, you can enjoy the high-quality value-added service of Yahoo Email
● 2G super large mailbox capacity Your mailbox capacity will be upgraded from 1G to 2G, easily storing more movies, pictures, and mp3s
● pop3/smtp enable pop3/smtp service, you can use Outlook, Foxmail and other clients to easily send and receive emails
● Email arrival reminder Whenever you receive a new email, Yahoo will notify you in time by text messages to avoid missing important emails
Step 1: Please enter your mobile phone number to bind to your email address so that you can receive email reminders correctly. Mobile phone binding is completely free
Please enter your mobile phone number here:
This service is not available to Yahoo Mail Alliance users and China Mobile users in Fujian.
Log in to your yahoo email. There is "2G capacity + POP + letter reminder" on the left
Click in and you will see the above content.
Modify the word "start" or "start" of the start button
Modify the start button, open "x:\windows\" with Resource Hacker, then find bitmap->176 and replace it with your favorite bmp file. It should be noted that the bmp file used here is the so-called 32-bit bmp, that is, the alpha transparent effect of 24bit bmp+8bit. I think everyone knows the specific production method.
As for the words "start" or "start" of the start button, its modification is also opened with Resource Hacker, and then find String Table->38->595 and change it to the words you want.
Cancel the default sharing
Cancel the default sharing
Method 1: Find key values:
Prohibit sharing of C$, D$, E$, ADMIN$
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\lanmanserver\parameters]
Modify key value: Set the value of "AutoShareServer" and "AutoShareWks" to: 0. If not, create a new DOWRD value.
Disable IPC$ sharing
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa]
Modify key value: Set the value of "restrictanonymous" to: 1, and if not, create a new DOWRD value.
Note: After canceling the automatic sharing on the power supply, the corresponding sharing must be removed. For example: Enter: net share c$ /del during operation, that is, delete the default C$ share.
Method 2: Use batch processing: Save the following two parts of the code as two files, place it in the same directory, and run it.
Save the following code as a .BAT file:
@ECHO OFF
TITLE is canceling the default partition sharing...
net share admin$ /del
net share c$ /del
net share d$ /del
net share e$ /del
net share f$ /del
regedit /s
exit
Method 3: Save the following code as a file:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\lanmanserver\parameters]
"AutoShareServer"=dword:00000000
"AutoShareWks"=dword:00000000
system32\Problems such as illegal file or the file is corrupted
In addition to most of the reason for the file setting error, there is another point here that the file has indeed been corrupted. For specific methods, please refer to the picture below.