13. Quickly format the partition:
After creating the primary and logical partitions, you also need to format them before they can be used. Now Disk Genius also has the function of formatting FAT16 or FAT32 partitions. This function is located under the Partition menu. Before formatting, you can set the size of the cluster, but generally you don’t need to set it, just use the default value. During the formatting process, you will be asked whether to scan the hard disk surface. Depending on your hard disk situation, if you are sure there is no bad sector, you don’t have to scan it.
14. Clear sector data:
This function fills hard disk sectors with empty bytes, which can completely disappear files in these sectors. But I want to remind you that before doing this, you must take careful consideration!
To use this function, first select the partition to clear the sector (you must not select the wrong one!), and then select "Clear sector data" under the Tools menu.
15. Hard disk surface detection:
Select "Hard disk surface detection" under the "Tools" menu to detect the hard disk surface of a certain partition. This function is not tested by "cluster" and does not identify bad sectors. Therefore, any type of partition can be tested. You can choose to press "Cylinder", "Trail", or "Sector" to detect. If you press "Cylinder" to detect, when a bad cylinder is found, the bad cylinder will be skipped and the next cylinder will be detected, so the speed will be faster. If you press "track" to detect, the found bad track will be skipped, so the speed is slightly slower. If you press "Sector" to detect, when a bad track is found, each sector in the bad track will be detected, so the speed is the slowest. After the detection is completed, a bad sector list will be generated and saved to "".
16. Copy the sector
This function is used to copy sectors and copy sector data from one location to another. For example, use the boot record of the FAT32 partition to backup and restore the corrupted boot record. This feature is located under the Tools menu. When running, follow the prompts to enter the source sector, the starting position of the destination sector and the number of sectors to be copied.
Experience: Disk Genius is indeed a very useful hard disk partitioning tool tailored for Chinese people. After creating, deleting, hiding, activate, modifying parameters and other operations on the partition table, the effect can be immediately seen from the interface diagram, but it does not really take effect at this time. It will only write your modifications to the hard disk at one time after you confirm that it is correct and issue a save command. Even if the modification has been saved and takes effect, you can still use its traceability function to "repent". When there is a problem with your hard disk partition, you might as well use Disk Genius for a "physical examination". Even if you are a novices, you can "surgery" the partition table fearlessly. We highly recommend you download a trial. Install Disk Genius on the system emergency boot disk and use it to back up your hard disk partition table information to the boot disk for emergency use. If you want to modify partition information, start Disk Genius from the floppy disk, so that the backtracking file will also be saved to the floppy disk, leaving you with a "regret medicine".
Previous page1234Read the full text